Your browser need to be updated to support the latest encryption standard. Your browser must support the encryption standard known as "TLS1.2". Unsupported browsers put your security at risk. Please update your browser.
If you are in a corporate environment, you may need to contact your IT department.
Tremco ExoAir 110 9-Inch is a Self-Adhered Air and Vapor Barrier Membrane
Out Of Stock
Ships Within 24-Hours, if in-stock.
$50 Minimum Order Value
ExoAir 110 Self-Adhered Air and Vapor Barrier Membranes are 36 mils (.90 mm) of self-adhering SBS rubber asphalt laminated to a 4 mil (.10 mm) cross-laminated , high-density polyethylene film with a siliconized release liner.
***This item can only be purchased by the case, there are 2 Rolls per case. Each roll is 75-Feet in length. This item is stocked only in Minnesota***
Rugged HDPE film protects SBS membrane against incidental damage during construction process. White facer reduces heat absorption compared to facers that may be darker resulting in lower thermal absorption during the construction cycle. Variety of widths are available for job specific needs.
ExoAir 110 is an impermeable, self-adhered sheet designed to be applied to exterior cavity walls to mitigate air infiltration/exfiltration, vapor transmission and water penetration. ExoAir 110 is typically applied to exterior sheathing boards and concrete block, but can also be applied to poured concrete, steel and wood based substrates. ExoAir 110 also serves as a detailing or transition membrane into window and door openings. ExoAir 110 is designed to be installed when both the air and surface temperature are 30 °F (-1 °C) and rising.